5 factors that inspectors look for during building inspection

One of the most important purchases you can make in your life is a house. It’s a way of showing you are already an adult with a plan and can make independent choices about your future. However, buying a brand-new home can be quite a pain in your pockets. Good thing you can find existing homes for sale that meet the needs of your growing family without the skyrocketing price tag. However, not all sellers will be upfront with you about any potential issues. This is where you will need a building inspection before you buy. Experts from sites, like http://www.melbournewidebuildinginspections.com.au/, will help you determine whether a home is worth your hard-earned money.

 

Here are the top factors that building inspectors look for:

 

1. The land

 

Building inspectors will check if the land is sloped or flat. If it’s elevated, they will check for possible surface drainage issues. They will also ensure that the drainage is properly installed.

 

There should be no water flowing under the home. The inspector will check under the house for any damp soil that might weaken the foundation of the structure and may invite termites. The path around the home should slope away down to the fence and not towards the home.

 

2. External walls

 

If you visited the website http://www.melbournewidebuildinginspections.com.au/, you will learn that building inspectors will look for any large cracks through the mortar. It is also important to check if the wall is straight and has no signs of unevenness or bowing.

 

They will further inspect the lower areas if there is any decay on the mortar or brick fretting. This is often a result of the rising damp issue, and you will commonly see this on older solid-brick homes or those with double brick walls.

 

 

3. Internal cracks

 

Building inspectors have a keen eye to look for cracks depending on their length, width, and number. If they notice cracks above the doors and windows, they will state in the report that some differential settlement in the foundation and footings of the home took place. If they notice cracks that are up to 5mm wide, they will advise that you monitor it for a period of 12 months. Cracks are a bit tricky to discover within a 2-hour inspection period. If your inspector is uncertain if it’s worth the risk, it might be best to look for another property. It’s better to be safe than sorry.

 

4. Safety issues

 

Part of the inspection are the verandas, pergolas, and carports. The inspectors will give the posts a shake to test if they are wobbly. If it is, then it is a sign that there is rot, which is considered a safety hazard.

 

The presence of two RCD (residual current device) switches is also important, especially if you are looking at an older home. You will find this when you open the switchboard or meter box.

 

5. Internal leaks

 

Checking for leaks from bathrooms and showers is also important. They are mostly present at the lower walls outside the shower. One important thing you should watch out for is if the paint is bubbling or has deteriorated. This is a sign that there is a leak, and you may need to call in a plumber to take a look at the issue.

 

Any staining on the ceiling is also a sign of a current leak or past leak. Inspectors usually use moisture metres to check if the area is still damp.

 

Not all home shoppers opt to call a professional to assess a home before buying. However, failing to do so will rob you of the chance to truly inspect the property for any major defects, structural defects, safety hazards, and other maintenance defects that should be addressed. If you are looking for a professional building inspector to evaluate a property before buying, visit http://www.melbournewidebuildinginspections.com.au/ for more details.